High And Audio System

Tubelover 76-6J5-300B PSE

This a 300B amplifier in class-A parallel single ended design. With either Sophia or TJ Full Music 300B mesh-plate tube. The driver is 6J5 tube and the input is 76 tube, which is known for nice details in high, speed, and pace. The rectifier is 5U4G tube from the old worlds stock. The output transformers and chokes are by Electra Print, and we utilize our in-house power transformer. The result is a fast and dynamic sound, which is hard to achieve with 300B. (SOLD, Rp. 20.000.000,-)

JBL ES150P Subwoofer

Marantz PM8004 Integrated Amplifier

Marantz AV7005 Networking AV Preamp/Processor

Pioneer VSX-921 - Compare prices

Tha Denon AVC-A1XV (DVD Player)

Yamaha A-S700 Integrated Amplifier

YAMAHA CA-1010

Klipsch's Palladium series: The BMW of speakers

AERIAL 7T

MODEL 7T PERFORMANCE SPECIFICATIONS
Frequency Response 28 Hz to 25 kHz ±2 dB, -6 dB at 23 Hz
Dispersion 30 Hz to 15 kHz +0, -3 dB from axial response
45 degree horizontal measurement window
Sensitivity 89 dB for 2.83 volts at 1 meter on axis
Impedance 4 ohms, 3 ohms minimum, low reactance
Power Requirements 25 watts minimum, > 100 recommended
Woofers Twin 7.1" (180 mm) with cast magnesium frames
Rigid bilaminate composite cones
Large magnets. 1.5" coils. Long, linear Xmax
Midrange 5.9" (150 mm) with cast magnesium frame
Special Papyrus blend cone. Copper pole sleeve
Dual magnets. 1.25" coil. Long, linear Xmax
Tweeter 4.1" (104 mm) with thick machined aluminum plate
Soft ring-dome design with machined wave guide
Dual magnets. 1.0" coil. Copper pole sleeve
Crossovers Fourth order acoustic Linkwitz-Riley
400 Hz and 3,000 Hz crossover frequencies
2 Physically separate networks. Biwirable & biampable
Cabinet 9 Layer laminated, curved, stressed MDF walls
7 Interlocked full-size braces. Tongue & groove joints
2-piece curved, damped baffle. Architectural veneers
Grille Cloth covered curved steel with hexagonal windows
8 Neodymium magnets. No visible mounting hardware
Finishes Gloss Cherry
Gloss Rosenut
Nero Metallic Black
Included Accessories Nero metallic black base.
Adjustable feet, black spikes, floor protectors
Optional Accessories Exposed machined hardware on laser cut steel bars
Dimensions 44.5 x 9.7 x 15.3" (1130 x 245 x 390 mm)
Height includes base and spikes
Weight Each 96 lbs (44 kg) Unpacked
154 lbs (70 kg) Packed
Specifications are subject to chang

THIEL CS3.7.

• Design: Three-way, Passive Diaphragm (Radiator)
• Drivers: One 1" Aluminum Dome, One 4.5" Midrange, One 10" Woofer, One 10” Wave-shaped Diaphragm
• MFR: 33 Hz - 26 kHz ± 2 dB
• Sensitivity: 90 dB/2.8v/Meter - Anechoic
• Nominal Impedance: 4 Ohms (2.8 Ohms Minimum)
• Recommended Power: 100 - 600 watts
• Dimensions: 45" H x 12.5" W x 21" W
• Weight: 91 Pounds
• MSRP: $12,900/Pair USA, Outriggers Optional

Pass Lab audiophile-grade SR1 Loudspeaker set for CES 2009

Fostex G2000

Fostex is going to release in Japan its high-end G2000 Magnesium Speakers. The G200 features two 200mm bass drivers, a 100mm mid driver, and 25mm tweeter. You can expect the G2000 to deliver a frequency response of 30Hz-35,000Hz, 90dB/mW sound pressure sensitivity, 150W maximum permissible input, and an impedance of 4Ω.

PIONER (TAD-R1) 
Pioneer Corp will release a new high-end speaker TAD Reference One (TAD-R1) in early April aimed at audiophiles and professional musicians. The TAD-R1 is a 3-way speaker system developed keeping in mind TAD's speaker design philosophy of accurate sound reproduction. The new speaker uses a vibration board made with a special material unique to Pioneer. Because the midrange speaker and tweeter are arranged coaxially, sound attenuates cleanly across the entire spectrum. The speaker can generate clear, precise sound over an extremely wide range of 8.5 octaves.

The new Pioneer TAD Reference One Speakers measures 554 mm (W) ×1293 mm (H) ×698 mm (D) and weighs 150kg (1Unit).The new speakers will be available for approximately 3,150,000 Yen ($25,900).

YAMAHA SOAVO 1
Other features include:
- Dual 6-1/2-inch Advanced PMD Cone Woofers
- 5-inch Advanced PMD Cone midrange driver
- 1-inch (3cm) aluminum dome tweeters
- Direct Bobin system
- DC-Diagram
- Magnetic shielding
- Read wood finish
- Gold-plated brass extruded terminals
- 35 Hz - 50 kHz frequency response
- 89 dB/2.83 V/1 m sensitivity
- 200W / 50W maximum/nominal input power
- 500 Hz / 5 kHz crossover frequencies
- 6 Ohms impedance
- 13-3/4inch x 41-3/8inch x 19-3/16inch
- 59.5 lbs.

ALI IKON 8
MADE IN DENMARK:

• Frequency range +/- 3 dB [Hz]: 35 – 30,000
• Sensitivity (2.83V/1m) [dB]: 91
• Nominal impedance [ohms]: 6
• Maximum SPL [dB]: 113
• Recommended amp. power [Watts]: 40 -250
• Crossover frequencies [Hz]: 700/3,000/14,000
• Hybrid tweeter module: 1 x 28 mm soft dome 1 x 17 x 45 mm ribbon
• Midrange driver: 1 x 6½”
• Low frequency driver(s): 2 x 8"
• Enclosure type: Bass reflex
• Bass reflex tuning frequency [Hz]: 28.0
• Connection input(s): Bi-wire
• Recommended placement: Floor
• Dimensions (H x W x D) [mm]: 1160 x 245 x 393
• Weight [kg/lb]: 33.3/73.4

B&W 683
SPECIFICATIONS :
Crossover Tuning
Mushrooms
Nautilus tube loaded aluminium dome tweeter
Flowport
3-way vented-box system
1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar cone FST midrange
2x ø165mm (6.5 in) Aluminium/paper/Kevlar cone bass
Frequency range: -6dB at 30Hz and 50kHz
Frequency response: 38Hz - 22kHz ±3dB on reference axis
Horizontal Dispersion Within 2dB of reference response: over 60º arc
Vertical Dispersion Within 2dB of reference response: over 10º arc
Sensitivity: 90dB spl (2.83V, 1m)
Harmonic distortion: 2nd and 3rd harmonics (90dB, 1m) ( <1% 90Hz - 22kHz , <0.5% 120Hz - 20kHz)
Nominal impedance: 8 Ohms (minimum 3.0 Ohms)
Crossover frequencies: 350Hz, 4kHz
Crossover Filters: 1st Order – tweeter , 2nd Order – midrange low pass , 2nd Order – midrange high pass , 3rd Order – bass
Recommended amplifier power: 25W - 200W into 8  Ohms on unclipped programme
Max. recommended cable impedance: 0.1 Ohms
Height: 985mm (38.8 in) (not including plinth or feet)
Width: 198mm (7.8 in)
Depth: 340mm (13.4 in)
Net weight: 26kg (57.3 lb)
Finishes (vinyl) : Light Oak
Removable black cloth grill

KEF REFERENCE 205
MADE IN UK
Design  : 4 way reflex
Drive units :     LF: 2 x 200 mm (8”)
                     MF: 1 x 165 mm (6 1/2”)
                     HF: 1 x 25 mm (1”)
                     SHF: 1 x 19 mm (3/4”)
Frequency response at 15°
horizontally off axis ±3 dB :   45 Hz - 55 kHz
LF Corner -6 dB :            35 Hz
Crossover frequencies  : 400Hz, 2.7 kHz, 15 kHz
Amplifier requirements :            50 - 300 W
Sensitivity (2.83V/1m) :            90 dB
Maximum output :    115 dB
Impedance :   8 Ohms (3.2 Ohms min
Magnetic shielding :   Yes
Weight   :    33 kg (72.6 lbs)
Dimensions  :  (H x W x D)  1155 x 285 x 433 mm---SOLD----